Injection Moulding Machines

[et_pb_section fb_built=”1″ _builder_version=”3.10″ custom_padding=”0|0px|54px|0px|false|false”][et_pb_row custom_padding=”27px|0px|0|0px|false|false” _builder_version=”3.10″][et_pb_column type=”4_4″ _builder_version=”3.10″ parallax=”off” parallax_method=”on”][et_pb_text _builder_version=”3.10″]

Injection Moulding Machines

[/et_pb_text][/et_pb_column][/et_pb_row][et_pb_row _builder_version=”3.10″][et_pb_column type=”4_4″ _builder_version=”3.10″ parallax=”off” parallax_method=”on”][et_pb_text _builder_version=”3.10″]

Most of the machines we use today are produced through injection moulding machines. These machines are produced from most of our household equipment as well as many parts of vehicles, office and other industrial machinery. These machines have the real industry that is behind most of the industries we see today. The products of these machines are used widely and required in all spheres of the economy to run secondary industry and the economy.

These moulding machines are now produced with very high technology with the capability of producing small air conditioner vents to large plastic equipment that can weigh more than a ton. Therefore, the machines also vary in size starting from table tops and going up to many tons. The capabilities of the machine and their costs vary proportionately. Some machines have multiple moulds and can be used to produce a variety of products through one machine with various qualities while others are more generic and depend on producing only one machine.


The injection moulding machines is called the same because it works by injecting the liquid plastic into the molds to produce the required products. Thermoplastic and thermosetting plastics are two types of polymers used as raw materials. The polymers are heated to a certain level so that they become liquid and then are injected into the cavity of the injection molding machine. The cavity is the strongest part of the machine, designed specifically to hold the liquid plastic in it until it solidifies and takes the shape. The cavity needs to be the toughest part of the machine as it has to me more resistible to temperature changes. As all products are required to be of the same quality, if the cavity expands or contracts due to the temperature changes, the quality of the products will suffer.

The injection molding machines have two processes. The first process is called the injection process wherein the polymers are injected into the injection barrel and heated to the melting point to form the liquid. This plastic fluid is injected into the mold or the cavity where it will cool off and take the desired shape. The hydraulic or mechanical pressure is then applied to ensure that there is no trapped air in the mold. The liquid plastic is then left to solidify and take the desired shape without any problems due to uneven spread or trapped air. Once the plastic has solidified in the desired shape, an ejection process begins using the ejection mold and pins that carefully remove the plastic without any damage to it. The process is simplistic and the changes in technology have mainly changed the quality of work and no substantial change in the major molding process has come out for some time.

The mold can be used repeatedly until it maintains the desired thickness and uniformity. Once the mold changes its appearance, wither the mold or the entire machine needs to be replaced. These machines are very expensive and specialized machines. A high quality machine can start go above a million dollars.